Wednesday, September 30, 2009

Take Pictures of Your Growing Foundation Damage Or Cracks

I champion people and try to get them to look at their house, at least once a year. One of the easiest ways to inspect your home is to use a home inspection checklist and if you really want a good home inspection checklist, there's a good chance that you are going to need to purchase one. You get what you pay for and don't ever forget that.

Foundation repairs usually start with a small crack and that's no joke. If you notice a crack, take a picture of it and save it somewhere. If you think, that the crack is actually getting a little bigger or starting to separate, you can simply take another picture and compare the two photos.

I would like to give you an example of what I'm talking about. Sometimes we look at something and we think that it's getting larger, but we don't have anything to compare it to. As time goes on, we think that the crack is still getting larger, but our mind is creating an optical illusion. This happens to a lot of people.

If you had a picture, from a few years ago, you could refresh your memory and this could be very helpful in reducing your anxiety or jumping to conclusions about foundation damage. Trust me, sometimes, I'm like a medical emergency crew, going to visit a homeowner to relieve their foundations stress. People panic over foundation cracks and I'm the doctor they call for any one of their home emergencies.

I would also advise you to take pictures of the rest of your home. How hard would it be to take about 300 pictures of your home each year and store them on your computer or on a disk, for easy access later? A picture is worth a thousand words and don't ever forget that.

Click Here for Some More Great Foundation Repair Solutions.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Problems. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Tuesday, September 29, 2009

Do I Need a Home Inspection? - Real Estate Advice

Most home inspections today run between $300 to over $1000 and sometimes you don't really get your moneys worth. There are home inspection companies that guarantee, any problems that they miss will be repaired at their expense over a desired period of time, usually a year. It seems like, most home inspection companies are just inspecting the property and have no guarantees or liability from their inspection.

It's not a good idea to buy or sell a home without getting a home inspection from a licensed home inspector. This is like having a second opinion from someone who is usually skilled in the process. I would like to point something out to unsuspecting, potential home buyers and sellers. Sometimes a home inspection company will get a little behind in their work and need to hire other home inspectors if these home inspectors don't have any experience in the construction business or have never inspected a home before. In other words there fresh out of home inspector school. You might not get a good home inspection.

You can always ask the question, how long have you been in business?... How long have you been a home inspector?... have you ever worked in the construction business or have any skills in home building and remodeling. If the answers to these questions are satisfactory, it doesn't mean, that they're telling the truth and being sincere and could lead to problems later if they are lying to you.

Let me rephrase the question now, "Do I Need a Home Inspection" from an unqualified home inspector? Absolutely not. But how can you really tell the difference and is the report going to be worth the money that you paid for it.

What would you say, if I had the solution to your problem. How about a pre-home inspection, using a home buyers checklist? What if I could give you a check list with questions, that you could ask your home inspector? Some of these questions are not going to be part a regular inspection but should always be asked and make sure you get the answers to them, before purchasing the property.

Would you be interested now? What if I told you, for under $20, you could purchase a home buyers checklist, now for the tough question, this checklist could save you thousands of dollars and prevent you from purchasing a home with major construction problems or defects, and can be used on every house you look at.

Don't buy a home without purchasing a professional home inspection checklist. These lists of questions can save you some serious headaches and stress in the future.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buyers guide to take some of the frustration out of home shopping.

If your looking for some more home inspection or home building ideas.

Plywood Roof Sheeting - Roof Framing Trade Secrets

Most framing contractor's look at the building plans and order all of the material, according to those that are specified on the plans. This works out fine, and can often save you money, but rarely produces the best home that you could possibly frame.

As a professional framing contractor, I would like to share one of my house framing tips with you. Most plans require half-inch plywood or oriented strand board as their roof sheeting. This product is fine and if you're building a lot of homes, you're not going to have the choice. Ordering larger sized plywood could cost you thousands of dollars, especially if you're building a lot of homes.

However, if your framing or building a home for someone or even yourself, you might want to take my advice and think twice about it, before ordering the roof sheeting. Half-inch plywood, works okay for 16 inch on center roof rafters or engineered truss roofing systems. It doesn't work well on 24 inch on center roof rafters spacing.

It is usually flimsy and weak at the center point, directly in between the 24 inch roof rafter bays. If you're going to use the half-inch plywood, I would recommend using plywood clips that are relatively inexpensive and can be placed in the direct center of each roof rafter bay on each sheet of plywood. These can be purchased at most home improvement centers or lumber yards.

The other alternative, and this is what I recommend, would be to use 5/8 inch plywood. This plywood works great for 24 inch on center roof rafters and you will have a nice sturdy roof to walk on, while roofing your home.

I have actually seen people step through the flimsy plywood, while lifting heavy roof tiles and bundles of composition roof shingles. Experienced roofers try to walk directly on top of the roof rafters, when loading their roof shingles or even carrying them on the roof.

If you're a home builder and your concern is about making a profit, you will need to use the half-inch plywood. If you want to build a superior roof, use the 5/8 of an inch plywood.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link House Framing Contractors.

You are free to copy this article to your site as long as you include the following resource information with an active link to my site:

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a excellent home inspection checklist to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Subfloor Damage From Poor Bathtub Installation - Read Bath Tub Fixture Manuals

You should never under estimate the amount of damage that water can do to your wood subfloor. Especially if this wood is underneath your bathtub. If the bathtub is not installed properly, you could find yourself replacing the wood underneath, within a short period of time. This repair is not uncommon and as more homeowners and handyman seemed to be doing projects like these, without the proper experience, it's becoming even more common.

I wish I had a solution to the problem, however, I don't. The best advice I could give anyone who is going to be involved in any home remodeling project, would be to get some books on what ever task you are about to undertake and read all of the information that you possibly can about the products you are going to be installing. This is extremely helpful for anyone who has never installed a bathtub or any bathtub fixtures.

If the product fails and was installed properly, the manufacturer should be responsible for the water damage. I have been reading the manufacturer's installation manuals for quite some time now and every once in a while, I find something that is of great value to me and I get to pass it on to my readers. That's what I'm doing right now.

Whether you want to remodel your bathroom to save money or you want to accomplish a task that you haven't done yet. I would recommend, taking the time to understand, exactly how the water flows off of and on to another section of the bath tub or shower on its way to the drain. Understanding the basics of bathroom remodeling can save you big money in the future.

Save yourself some money and make sure that you install your bathtubs properly. Taking a little time before you start to read the bath tub fixture manuals, can save you some money and grief in the future.

Find More Facts On Home Water Damage.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Check out These Amazing Home Damage Videos.

Five Things That a Termite Inspection Company Might Not Ever Say

I don't think that I've ever heard of a termite inspector, ever go to a home and not find any termites. Even if the home doesn't have any damage that is visible from the termites, it seems like it's always a good idea, to tent the home, just in case, for protection. Anyway, here's five things that you might not ever hear a termite inspector ever say.

1. Your house is free of termites. This means that there isn't, one termite on your property and the termite inspector isn't going to make any money. Let's face it, termite damage, whether it's visible or invisible, keeps these guys working.

2. Your house isn't going to fall down, if I don't do anything to stop the termites. I have seen homes, where termites have been working on them for quite some time and they still seem to stand up and function properly.

3. Termites don't eat much and I wouldn't worry about the damage. Most termite inspectors will tell you how much a termite in Hawaii or Africa will eat in a day, but doesn't seem to have an honest idea, how much damage they are doing to your home, if they can't actually see it.

4. Every one that works for our company, has at least 30 years experience, repairing any termite damage. Don't even get me started with this one.

5. We will replace all of the termite damage wood, back to its original condition. What they might say, is that they will replace the wood that is damaged by termites, that you can actually see.

There are plenty of great termite companies out there and this article was meant just to have fun with most of them. Termite damage can be a serious problem with some homes and I would suggest that you contact at least three termite inspectors, before proceeding ahead with any home repairs or use of chemicals.

Try not to forget, the only way that a termite inspection company will make any money, looking at your house, will be to find something wrong with it.

If you're really interested in basement remodeling and repairs, you should click on this link Easy Home Repair Tips . Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link San Diego Remodeling Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Monday, September 28, 2009

What If My Contractor Does Not Return My Call

This is one of the biggest problems in business today. You have some work done on your home in good faith that the contractor knows what he is doing. When all is said and done you have a problem that needs to be resolved as soon as possible. I really don't care how long it has been since the work was done. If you have a problem the least that your contractor can do is answer the telephone.

Some companies go out of business and others get to busy to respond to your problem. You will hear the old excuse "That's not my problem" or the ever popular " I didn't do that". I have been in business for over twenty years and had very few problems. Of course I built things to last as long as possible.

Keep in mind that some contractors are a one man operation and they might be on vacation. Some contractors do not answer their phones over the week ends or after business hours. So don't sink the ship to fast.

Do not call the Contractors Licensing Board or the Better Business Bureau unless it has been at least a few working days. I would give it at least a week or so. Oh yeah don't assume that the contractor got your message. Call a few times at the least.

It has always made me mad when I have to fix someone else's problems. I get the call when the other contractors won't respond. I listen to the home owner with regret for being in a business where I am considered a crook. This is one of the reasons why contractors in my business get out of it.

If you have the contractors address and they aren't responding by phone you can always send them a letter by certified mail. Request a return receipt. That's your proof that the company received your letter. Keep a copy for your files.

The good news for a home owner when a contractor will not respond to your calling them is the Department of Consumer Affairs. Most states have a complaint department of some sort that will listen to your complaints. Does this mean it will get resolved? NO there are no guarantees here.

If your state has a licensing board for contractors, this will be your next step.

This will get your contractors attention and there is a great chance they will respond now. If there are enough complaints against the contractor and they do nothing about them the contractors board will take their license away.

If your contractor does not respond after all of this. There is very little you can do about it. Hire someone to fix the problem and look at it as a very important lesson learned.

If your state doesn't have a contractors licensing board contact the Better Business Bureau or your local government for their recommendation. Ask some of your friends if they have had any problems like this and how they handled them.

For some more tips about hiring contractors go to
http://gregvan.com/library/homeowner_checklists.htm

Greg Vandenberge has been in the home building and remodeling business for over 30 years. With this knowledge he has created a few websites that provide useful information for home owners as well as contractors. His main goal is to educate professionals in the home related businesses, dealing with problems that can easily be avoided with just a little bit of information.

His website http://gregvan.com provides all kinds of answers to remodeling and new house building issues that could create major damage as well as possible damage to your pocket book.

Plumbing Problems and Solutions - Repair Manuals

If you've owned a home for over 20 years, there's a very good chance, that you've had a water pipe break, a drainpipe clogged, a toilet that wouldn't flush right, or a water leak that damaged part of the home. If you don't know, what you're looking for and you have no idea what damage can be done, over time, this could mean trouble for the homeowner.

Plumbing problems like these have been around and will be around for many years. Knowing what to do about them, how to repair them and what materials will be needed, can be found in plumbing repair manuals for books. How would you like to have a professional plumber to advise you on your plumbing repairs. What if I told you that you could have a plumbing professional on hand at all times. Is this something that you might be interested in.

Well I can't guarantee that, so let's forget about what I just said and go to the next best thing. Plumbing repair manuals are full of tips and advice that when needed can sometimes be priceless. If water is leaking from the ceiling in your home and you have no idea, where the water is coming from or how to stop it from leaking, any information could be priceless and I mean priceless.

Plumbers, usually charge over $100 an hour for emergency service. I've seen plumbers come to peoples homes, turn the water off to the house, stop the water from leaking and now it is no longer an emergency. The plumber quickly pulls out an invoice for the plumbing repairs and it could be over $1000, if you decide that this is ridiculous and choose not to pay it, the plumber can hand you a bill for stopping the water leak. Some of these bills are what I would consider quite ridiculous, for just shutting the water off.

You're not paying the plumber for the amount of time it took him, you're paying him for his knowledge. If you knew where to shut the water off, you wouldn't have an emergency situation and could contact a plumber during normal hours. This could save you hundreds if not thousands of dollars.

With a simple home repair manual or a home plumbing book, you could prepare yourself for a situation like this and other plumbing problems. Most home repair manuals have general solutions and advice and can solve most of the problems around your home. If they can't solve all of the problems, they can probably save you from major catastrophes like a water leak.

Most of the time it's not the water leak that will cost the most money, it's the damage the water will do to your furniture, carpeting, wood flooring, walls or ceilings. A little information and preparation can save you a lot of money in the long run.

Home Plumbing Books

You are free to copy this article to your site as long as you include the following resource information with an active link to my site:

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buyers guide to take some of the frustration out of home shopping.

Friday, September 18, 2009

Five Things That a Termite Inspection Company Might Not Ever Say

I don't think that I've ever heard of a termite inspector, ever go to a home and not find any termites. Even if the home doesn't have any damage that is visible from the termites, it seems like it's always a good idea, to tent the home, just in case, for protection. Anyway, here's five things that you might not ever hear a termite inspector ever say.

1. Your house is free of termites. This means that there isn't, one termite on your property and the termite inspector isn't going to make any money. Let's face it, termite damage, whether it's visible or invisible, keeps these guys working.

2. Your house isn't going to fall down, if I don't do anything to stop the termites. I have seen homes, where termites have been working on them for quite some time and they still seem to stand up and function properly.

3. Termites don't eat much and I wouldn't worry about the damage. Most termite inspectors will tell you how much a termite in Hawaii or Africa will eat in a day, but doesn't seem to have an honest idea, how much damage they are doing to your home, if they can't actually see it.

4. Every one that works for our company, has at least 30 years experience, repairing any termite damage. Don't even get me started with this one.

5. We will replace all of the termite damage wood, back to its original condition. What they might say, is that they will replace the wood that is damaged by termites, that you can actually see.

There are plenty of great termite companies out there and this article was meant just to have fun with most of them. Termite damage can be a serious problem with some homes and I would suggest that you contact at least three termite inspectors, before proceeding ahead with any home repairs or use of chemicals.

Try not to forget, the only way that a termite inspection company will make any money, looking at your house, will be to find something wrong with it.

If you're really interested in basement remodeling and repairs, you should click on this link Easy Home Repair Tips . Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link San Diego Remodeling Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

How to Protect Foundation Plumbing Pipes?

If you install any underground plumbing pipes, in your concrete building foundation, you will need to protect them, from the concrete. You can use a variety of products and the most common of them will be a Styrofoam wrapping that can be purchased at most plumbing supply stores.

Let's start with the waste pipes, that are made out of plastic. The concrete could actually start to put pressure on the plastic pipes as the concrete starts to expand and this pressure could actually damage your new waste pipes.

You don't need to wrap all of the plastic waste pipes, only the parts of the waste pipes that will be exposed or in direct contact any concrete, but you do need to protect every copper water supply line that will be buried under the ground or exposed to the concrete, with a plastic sleeve. These products can be purchased again at most building supply or plumbing supply stores.

If these pipes aren't protected properly, you could find yourself within a short time, repairing the pipes that are either inside of your concrete foundation or buried underneath your concrete foundation. Either way, this isn't going to be a good thing.

You definitely need to wrap a plastic sleeve around the water supply pipes that are going to be buried or in direct contact with the concrete. This is a must and most building departments will require your plumbing pipes to be wrapped, before it they will sign off on your rough foundation plumbing inspection.

However, for the waste pipes, you can actually use cardboard to protect them. If you're short on funds, why not grab some cardboard boxes, dismantle them and start using cardboard to wrap the pipes, with a little duct tape.

There are plenty of ways to save money in the construction business, buy a few books, read a couple of articles, with a lot of pictures in this can provide you with lots of construction information, from experience building contractors.

Check out some of the best selling Home Building Plumbing Books all on one website

If you're really interested in basement remodeling and repairs, you should click on this link Home Repairs. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks for reading our articles

Plywood Roof Sheeting - Roof Framing Trade Secrets

Most framing contractor's look at the building plans and order all of the material, according to those that are specified on the plans. This works out fine, and can often save you money, but rarely produces the best home that you could possibly frame.

As a professional framing contractor, I would like to share one of my house framing tips with you. Most plans require half-inch plywood or oriented strand board as their roof sheeting. This product is fine and if you're building a lot of homes, you're not going to have the choice. Ordering larger sized plywood could cost you thousands of dollars, especially if you're building a lot of homes.

However, if your framing or building a home for someone or even yourself, you might want to take my advice and think twice about it, before ordering the roof sheeting. Half-inch plywood, works okay for 16 inch on center roof rafters or engineered truss roofing systems. It doesn't work well on 24 inch on center roof rafters spacing.

It is usually flimsy and weak at the center point, directly in between the 24 inch roof rafter bays. If you're going to use the half-inch plywood, I would recommend using plywood clips that are relatively inexpensive and can be placed in the direct center of each roof rafter bay on each sheet of plywood. These can be purchased at most home improvement centers or lumber yards.

The other alternative, and this is what I recommend, would be to use 5/8 inch plywood. This plywood works great for 24 inch on center roof rafters and you will have a nice sturdy roof to walk on, while roofing your home.

I have actually seen people step through the flimsy plywood, while lifting heavy roof tiles and bundles of composition roof shingles. Experienced roofers try to walk directly on top of the roof rafters, when loading their roof shingles or even carrying them on the roof.

If you're a home builder and your concern is about making a profit, you will need to use the half-inch plywood. If you want to build a superior roof, use the 5/8 of an inch plywood.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link House Framing Contractors.

You are free to copy this article to your site as long as you include the following resource information with an active link to my site:

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a excellent home inspection checklist to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Thursday, September 17, 2009

Stair Lighting Problems - Safety Home Ideas

Walking up and down the stairs in the dark could become a safety issue. If the stairs in the house are not that old, there should be a light switch at the top and a light switch at the bottom of the stairway. This is a three way switch and is designed to allow you to turn the stair lighting on as you walk up the stairs and then turn the stair lighting off, once you've safely reached the top of the stairway. And vice versa as she walked down the stairs.

If you don't have a light switch, there are motion sensor lights that are battery operated and can be installed easily in the stairway. These lights can provide you with peace of mind, while protecting your family from accidents.

Stairway accidents are nothing to joke about, I lived in a two-story house with four other people and was the last one to fall down the stairway. None of us got seriously injured and the stairway was built to meet local building codes and was inspected by a building and safety inspector. The stairs were built correctly and the stair lighting was no problem, but people still fell down the stairway and it always happens in the evening.

During the day time there were two windows that let plenty of light into the stairway and in the evening the stairway became quite dark, rarely was the stair lightning ever turned on. This could have been outright laziness but nevertheless, it was rarely used and eventually became a safety issue.

Lighting your stairway might not end all of your problems but it can and some of your problems. There are plenty of stair lighting systems available on the market today and some of the battery operated stair lighting systems can be installed by most homeowners.

Think safety always and do your best to solve your stair lighting problems as soon as possible to prevent injuries or accidents.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If your looking for some more building stairs or home building ideas.

Pocket Door Problems

Wednesday, September 16, 2009

What to Do If You Are in Disagreement With Your Builder

Hiring a builder to complete a new construction or remodeling project can be very costly; therefore you will want to be sure that you are careful about which builder you hire, and that you know what to do if you do happen to run into a disagreement with your builder.

Before hiring a builder, you should carefully review their qualifications and their contract. Ask for references, and a list of jobs that they have worked on; once you have their references, it is in your best interest to contact the owners of those buildings and ask permission to inspect the work that the builder did for them. This may not always be possible, but if it is you should take advantage of the opportunity to verify the builder's work quality.

It is also advisable that you check the website of the Federation of Master Builders to see that any builder you are considering contracting with, is a FMB member. Ensuring that your builder is a FMB Builder is very important because if you do have problems or disagreements with the builder, you can turn to the Federation of Master Builders for assistance and advice. In addition, a builder in a trade association may offer a guarantee on the work they do for you.

Another significant step that will help you to avoid problems with your builder is to get quotes from several builders before you decide to hire. It is important that you remember that what you want is a quote, and not an estimate. If you are given a quote in writing, the builder is legally bound by that quote, but the same is not true for an estimate.

Before entering into a contract with a builder some key things to consider are that the conditions outline in the contract require the builder to complete the job specified according to applicable building laws, and any agreements that you and the builder have come to in regards to penalties for delays, payment schedule, as well as a guarantee of work quality are also outline.

A good builder will always use quality materials, so you may also want to ask the builder who their material supplier is, and if you are having concrete work done it is also advisable to ask the builder who their construction chemicals supplier is, as well as which construction chemical manufacture they get their supplies from.

If after you hire a builder, you have a disagreement with the builder at some point during the work's progress, or even at the work's completion, there are options open to you. For example, you may disagree with the amount of the progress payment, or have a dispute over the quality of the work. In a situation such as this, you would take your dispute to an adjudicator, but first you should talk with the builder to see if you can come to some type of agreement. If this is not possible, you do have the right to use this adjudication procedure, even in the situation where the dispute is presently being dealt with by some other court or tribunal.

To begin this process you must send a "Notice of Adjudication" to the builder; the notice must contain the date of the notice, the nature and particulars of the disagreement, and the parties involved, as well as what you would like to have done about the disagreement. Additionally, it will be necessary to include your name and address, as well as the builder's.

After sending the builder a "Notice of Adjudication" an adjudicator is chosen; at this point you will have to provide the adjudicator a written adjudication claim after receiving a notice that the chosen adjudicator has accepted the position. This claim must contain all relevant documents to your dispute, including a statement of the nature and grounds of your disagreement, as well as a copy of the notice of adjudication. A copy of the adjudication claim must also be served on the builder.

At this point, the builder will have 14 working days in which to respond to the adjudication claim. It is the builder's responsibility to see that you receive a copy of the response as well as any documents that accompany the response.

As you are going through the adjudication process it is important to understand that the adjudicator can implement any procedure that they deem best for the situation. For this reason the adjudicator may require you to make written submissions within a set time, provide copies of documents, appoint experts to advice on certain issues, and they may also require a conference of all parties involved. In some cases the adjudicator may ask to inspect the builder's work, and although you do not have to give permission for this, it is advisable to do so.

During the adjudication procedure you have the right to be represented by a lawyer, or another party if you believe it necessary. In most cases each side will bare their own costs during adjudication, but in some cases the adjudicator may require one party to pay all costs if it is discovered that one of the parties made false allegations, or maliciously refused to cooperate with the procedure.

The adjudicator will have 28 days to make a decision on the case, but it is possible for them to ask for a 14-day extension in some situations. If both parties agree, there may be an even longer extension.

Once the adjudicator has made a decision on the case, either party may choose to comply or begin litigation so that they may have the case heard in court, although in most cases the courts will uphold the adjudicator's decision.

It is never a pleasant experience when you deal with a builder that does not perform the work as expected, but it is important to remember that you do have options open to you if you wish to recover any money you have lost, or force the repair of shoddy work.

Sam D Goddard has many years of experience in the Construction Chemicals industry and enjoys writing articles on the subject. For more information on Construction Chemicals Manufacturer, click here.

Structural Framing Beams

Tuesday, September 15, 2009

Remodeling Your Bathroom For Your Health

You might be cleaning your bathroom on a regular basis, scrubbing the bathroom tiles and the toilet bowl, as well as wiping down the shower and changing the towels regularly, but are you doing enough? The motivation for contemporary bathroom might not be about creating a modern style, but rather making sure that your bathroom is clean and healthy to use. In order to keep you and your family safe, here are some bathroom remodeling tips you need to use.

What is lurking in your bathroom?

One of the biggest problems in the bathroom is bacteria and this makes sense given the fact that you use the bathroom for germ filled activities, using the toilet and cleaning off your body. However, these bacteria do not normally cause problems for healthy adults when you clean regularly. If you have someone in your home that might be more sensitive to these kinds of germs, you can start a contemporary bathroom remodeling project that includes surfaces that are easier to clean, i.e. flat surfaces and metals, so that germs cannot congregate. Black mold can be much trickier to find, residing in the walls and underneath bathroom tiles, so there is more work to be done for that kind of grime.

Battling mold with a remodel

When you suspect that you have mold in your bathroom, the first thing you will want to do is call in someone to test your speculation. A mold testing professional will come out to your house to see just how many spores are in your bathroom and whether or not you need to hire someone to remove the mold or you can remove it yourself. If you are able to remove it yourself, you will want to get rid of all of the items that are infested with the mold, fixtures, wall pieces, cabinets, bathroom tiles, etc. This will get your bathroom off to a clean start. If you cannot remove a particular item, you can clean it down with a bleach solution or as recommended by the tester or other professional. In this remodel, you will also want to install a high quality bathroom fan that will keep the air from being moist and allowing mold to grow in these conditions.

Other tips for remodeling for health

Those with allergies will need certain help from your contemporary bathroom remodeling project. Those with allergies to dust and mold will need the bathroom to be easy to clean. Surfaces need to be flat and smooth, without any cracks or crevices that might harbor dirt or allergens. If you currently have bathroom tiles, these will probably need to be removed and replaced with a flat tiling setup. Those with immune system problems will need surfaces to be made from anti-bacterial materials, which are expensive, but worth the additional costs. The biggest concern is simply the regular use of a good, high quality bathroom fan. This fan should be used during any showers or baths and then be run for at least thirty minutes after the bath has ended. The fan should be cleaned on a monthly basis, if not more regularly. You might also want to look into HEPA air filters for your bathroom, if severe allergies are an issue.

Your bathroom is always going to be a popular room in your house, but when you plan a contemporary bathroom remodeling project with health in mind, it will be the safest room in the house as well.

Dave Robert is a VP at Discount Bathroom Vanities Publishing, and an avid fixer-upper who's been restoring old houses for more than twenty years. Readers can tap into Dave's knowledge about home remodeling, and kitchen and bathroom design, at: http://www.DiscountBathroomVanities.com

Materials For Stair Treads

Property Inspections Are Important

Purchasing a home is quite possibly the biggest physical investment the average person will make in their lifetime. We pay mechanics to examine the insides of our cars, so why not pay an expert to examine the insides of our properties (certainly a far more valuable asset)? The cost is generally in the low hundreds, but could end up saving you thousands. A pre-purchase building inspection could also see the price tag lowered on your dream home.

A property inspection involves a qualified professional thoroughly examining the building for defects and structural problems. Such defects could include water damage as a result of shower leaks or any other leaks, termite damage, timber decay, moisture in sub-floor, poor brickwork, cracks in bricks and walls, roof and footing defects and any other structural problem that may exist. A property inspector can also check for illegal building practices.

All potential home buyers should arrange a building inspection before purchasing property. Of course there are already enough costs associated with buying a house, but it works out a lot cheaper in the long run if you discover a termite infestation or shonky brickwork before signing anything. Building inspections are also useful for settling disputes between neighbors about possible construction work damage, as well as buyer and seller disputes.

Quality property inspection companies will also offer additional services such as pest inspection. A pest inspection may reveal unwanted guests such as cockroaches, mice and wasps nesting in a hidden location. Or worse: termites. Termite damage has the ability to destroy houses before a problem is even realised. Unfortunately they are usually not visible to the naked eye. This is where additional pest inspections can really come in handy.

All good inspection companies will use moisture meters, listening devices, and most importantly, a thermal camera to seek out potential termite infestations. Basically, this camera will detect higher temperatures within the walls of your home, which indicates that termites may be nesting in these areas. Pest inspections will also reveal whether there has been past termite activity in the building.

Some things to check for before buying a house include moisture and mold on walls and ceilings, flaking paintwork, rotting timber and cracks in brickwork and walls. However; arranging a building inspection is the best way to get definitive answers and repair quotes. A good building inspection company will offer a detailed report citing the damage found and estimate repair costs. Images of the defects and expert advice are an added bonus. Make sure that the property inspectors you hire are licensed and have their own indemnity insurance.

This article was provided by Childs Property Inspections: Professional building inspectors who provide a wide range of property inspection reports for Australian homes including Dilapidation Reports Pre-purchase Building Inspections and Termite Inspections.

Nailing Or Screwing Drywall

Monday, September 14, 2009

Window Header Framing Problems - Building Problems

As a building contractor it is my job to assemble the house to meet the specifications from the architect and the structural engineer. I do this by looking at the building plans and installing the specified lumber sizes. I can take it upon myself to install a larger size wood beam or window header adding an additional cost to the job of course. I don't think so.

It's not uncommon for a framing contractor that has an additional 5 foot scrap piece of 4 x 8 left over that he now has no use for. He can then choose to use the 4 x 8 instead of a 4 x 6 for the window header. This type of building is common and acceptable.

If the structural engineer calls out for 4 x 6 window and door headers do not take it upon yourself to replace the 4 x 6 with a 4 x 4. I have seen too many framing contractors or carpenters make an on-the-job judgment like this.

A good example would be a single story house with 2 foot wide windows that require a 4 x 6 window header. As the carpenter builds homes over the years he can come to his own conclusion that a 4x4 will work fine for this application. Again keep this in mind as a framing contractor and a carpenter you are assembling the home not designing it.

Do not change the sizes of any headers or beams.

A long time ago carpenters used a standard rule of thumb, you could go up two sizes larger than the window opening for your header. Let me give you an example of what I'm trying to explain.

A 4 foot wide window opening would require a 4 x 6 window header. A 6 foot window opening would require a 4 x 8 window header. This should give you an idea of what I mean by going up two sizes larger than the window opening to figure out the lumber necessary to use for your window header.

This rule of thumb does not necessarily apply in today's building industry. The reason for this is structural changes from earthquake damage. The structural requirements that are required for building a home require a lot more metal bracing and strapping. Therefore some of the lumber requirements for beam sizes and window headers will be different.

This message is for general contractors, framing contractors and carpenters. When installing a window header and you take it upon yourself to change the size you also assume the responsibility if the building fails. This type of mistake is common and you guys know what I'm talking about.

It's not worth it. Keep in mind you are the assembler and not the designer of the building you are working on.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and House Framing Structural Repairs

Plaster And Drywall Cracks

Sunday, September 13, 2009

Benefits of Underpinning - Construction Tips

In the construction world, underpinning is a process in which you strengthen and also stabilise a foundation of a building which could be potentially dangerous if no action was taken. What are the benefits of underpinning a building or structure the building really need the work doing to it? These maybe a few of the question you may ask yourself if a surveyor tells you that your building needs underpinning. A few of the reasons and benefits you should consider are as follows...

1) The existing foundations are not strong / stable enough - underpinning will correct these problems.

2) The use of the building has changed - Possibly you have changed the purpose of a building, maybe from a house to a shop - underpinning will allow the building to take more pressure.

3) The soil properties that the building lies upon have changes - there could have been some movement in the ground, perhaps through subsidence - underpinning will help strengthen the building in this case.

4) New buildings or structures added to the surrounding area. If a new house is build next to an existing property, then underpinning maybe needed to strengthen the first property.

5) Land cost has increased. If the price of land increases by a great deal, it maybe cheaper to use underpinning with a view to improving the existing property (perhaps adding a new floor) rather than purchasing more land.

As you can see, there are many different reasons why you should consider underpinning rather than neglecting the reasons for using it.

Underpinning foundation Engineers
Underpinning foundation

What Kind Of Wood Rot

Saturday, September 12, 2009

Wood Sub Floors are a Rotten Choice

For many homeowners, the idea of a basement finishing is to remodel the area the same what the rest of the house has been designed. This means they'll want their ceiling to be made of drywall to look like the rest of their house. The furniture should be the same decor, and their floors- the wood sub floors and beautiful, thick carpet laid on top- should be placed downstairs as well.

Unfortunately, this is not going to work. A drywall ceiling is going to give little or no access to pipes running along your basement ceiling, and a single plumbing leak will cause enormous damage to it. The basement walls have fewer windows than the rest of the house, and if you lay wood on a concrete basement floor, it's going to lead to a home improvement disaster.

The problem is this: concrete is porous like a sponge. If you have moisture in the earth around your basement floor, the concrete floor will soak that moisture up from the ground and release it into the basement air in the form of water vapor. The dirt around your foundation was backfilled in when the foundation was built. Because of this, it will always be looser and more porous than the virgin earth around it, and water will always collect against your home's foundation more than anywhere else.

As this moisture soaks through to the basement and is released, it will collect on anything lying on your basement floor. If you've laid a wood sub floor and carpet on the floor, then you can count on that to soak up this moisture and grow mold, mildew, and rot. Your basement will fill with mold spores, dust mite feces, and unpleasant odors as your wood sub floors and beautiful carpet decays. In a few years, the damage will be more than you can stand, and the whole finished basement floor will need to be ripped up and replaced. The solution to this comes in two easy rules:

Rule 1: Never install wood floors in a basement.
Whether it's in the form of moisture coming through the concrete, a foundation leak, or a plumbing leak from within the house itself, water will reach the basement floor sooner or later. It only takes about 48 hours for mold to start growing, and there's no easy way to dry wood sub floors out. Installing wood sub floors in a basement is a risk at best and a disaster at worst.

Rule 2: Add a reliable plastic vapor barrier to your floor, then lay your carpeting on top.
A thick pile carpet will add warmth to the room and will absorb sounds, making the finished basement quieter than ever. It'll be softer under foot and will make the room as comfortable as possible for children to play in.

Once you've done a basement waterproofing, Basement Systems recommends and installs ThermalDry floor matting on your concrete basement floors. It creates a waterproof vapor barrier on your floor that will protect your carpet from basement moisture while insulating the floor to make the surface as much as ten degrees warmer than the concrete floor beneath. Our floor matting last twice as long and take only 3/8" of head room from the basement floor as opposed to the 4" that wood sub floors can use. Our sub floors outlast several generations of carpet, come with a written warranty, and will not support the growth of mold and rot. What more could you want?

Jacques Bouchard
Basement Systems
Total Basement Finishing
60 Silvermine Road
Seymour, CT 06483
800-541-0487 x9335

I Have A Squeaky Floor

Install Kitchen Cabinets - House Remodeling Ideas

One of the best ways to economize on your kitchen project cabinets, thank about installing on your own.

If you have the correct hardware with some strategic planning, the procedure is really quite simple.

You will need to make up a plan to successfully attack the installation of you your kitchen cabinet with a friend or partner, though, because it's very difficult to position those cabinets alone.

Continue to study this to learn the information about how to easily install kitchen cabinets by yourself!

* Before anything else, assemble the cabinets employing the instructions that accompanied them.

* Employ a pencil to lightly mark the cabinet positioning. Insure that they will be level and will not interfere with your electrical outlets, will permit you to use your current plumbing, and things if this nature. How dreadful would it be if you found when your installation was complete you determine that your sink doesn't fit..

* It does not matter hardly at all, you can choose to install the wall or the floor units first. Included instructions direct you need to install the units of the floor first, however if you are more comfortable you can do it the other way around.

* Employ a stud locator to find the studs for each cabinet. Make certain to fasten the cabinets to the studs, and use cabinet screws instead of using drywall screws. Drywall screws just can't cope with the weight of kitchen cabinets.

* Bore guide holes. This prevents your cabinets from splitting and results in the cleanest joins.

* Fasten the cabinets to the wall studs employing a cabinet screw at the top and bottom of the cabinet unit. For sturdier cabinets, it's a very good idea additional to screws to buttress the weight.

* Examine each cabinet to make sure that it's level before securing it to anything. It could be necessary to add filler material like wood slats or tile underlayment beneath the units to insure your cabinet's level.

* Set the corner cabinets first, since it will be impossible to move the wall if you end up with less space than anticipated! Subsequently install the other units around them. If you have voids between the units or need to adjust one down to allow for the wiring or plumbing, place a wood panel in-between the units.

* When you're ready to install non-corner units, it would be a important idea to fasten them together, and then attach them to the wall. This assures that the front panels are flat and flush with each other.

* In the case of wall units, the procedure is nearly the same, however if you have really sturdy ones, you will most likely need to employ wood pieces called "shims" beneath them to help underpin the bulk.

* You may choose to employ a friend or partner to help hold up the cabinets, however if you followed the suggestion to connect your cabinets into a row before you put them up, it's going to be difficult to handle all that bulk. Experiment with stacking buckets or paint cans beneath the units to assist in keeping them up there. You should still to have your helper hold tightly; it would be really despicable if they fell over and were blemished or fractured

* Once you have got all of the screws into place, you will need to carefully remove the supports.

Complete Renovations | Home Improvement Loan | Home Decorating | Kitchen Backsplash | Public Designs

Ice Dam Problems And Solutions

Friday, September 11, 2009

Welding Arc Flash and Its Affects

When you are working with a welder there is always the potential for Arc Flash. Anything that you do that works with electricity can do this and it can be a deadly process. Arc flash can happen on a large or small scale, and depending on the welder's safety precautions, it can cause severe burns or be deadly.

An Arc flash happens when there is a fault somewhere in an area where the welder is working. A quick and sudden amount of light energy and heat are released and if the welder is standing in the way, they can receive intense burns or the arc flash can be fatal.

This flash can also destroy equipment, cause eye problems and hurt people within a large radius from where it happened. In order to understand what this may look like, think about a large bolt of lightening that comes down and hits something on the prairie. This arc of light could explode the material that it hits upon and cause a lot of damage to that material.

This is basically what happens in an arc flash. This does not have to happen on a large scale only because you can also suffer from it when you are not using the correct safety equipment when you are welding.

The welder will expose themselves to UV rays that can hurt the surface of your cornea. Sometimes you don't know that this has happened until your eyes begin to feel warm. You may not know it until the next day when you have pain in the eyes. This pain can feel as though you have fractured glass in your eyes.

When you are doing welding it is very important to use a welding lens shade that is at least a number 5 and should be worn within 20 feet of the welding that is being done. If you are standing within 10 feet then you should use a number 9 lens.

Normal arc flashes can also expose you to fumes and toxic gases so it is crucial to your survival to make sure you are in an area that is well ventilated when you are doing your work.

It is equally important to make sure that your equipment is functioning properly because often an arc flash is cased by faulty equipment. You will need to check enclosed systems also because these can cause a problem because some electrical equipment can become energized when it is faulty.

There are a variety of products that can help you resolve issues of arc flash as long as the equipment is working properly, but they only work if the welder will use them. You can get specially insulated gloves, rubber roll blankets (that allow you to isolate the area that you are working within) and carbonX clothing for protection.

Although arc flash can be deadly when it happens, knowing the safety precautions needed can help you get out of the way and be safer. It is wise to know the consequences of arc flash and how to prevent it as much as possible.

Go to WelderWorld.Com to get your free ebook on Welding at Welding. Welder World also has a Welder Forum where you can discuss welding with other welders and get tips for welding or showcase your welding work. Come to WelderWorld.com to check out our new community site all about Welding and get your free ebook on the basics of Welding at Learn Welding.

Buying A Functional House

Thursday, September 10, 2009

Sloping Floors in Your House - Home Repairing

If you've ever been in a building where you feel like you are getting pushed to one side and you can't seem to stand up. You have either been drinking too much alcohol or the floor could be sloping. I was just in a store the other day that was full of antiques and glass but I could hardly stand up because the floor was sloping enough to create what I would consider a liability issue to the store owner.

Sloping floors are not going to be that easy to fix and repair. Repairing these floors will require a little skill and it would be a good idea to hire a professional to repair the damage. This is not going to be a simple fix and this is probably the main reason most people never choose to fix their sloping floors.

Fixing these floors will require either pouring a new concrete slab, replacing the wood floor framing members or replacing the actual building foundation itself. No matter how you look at it the sloping floor is going to be a costly item to repair.

What causes a sloping floor? Termite damage or dry rot destroying the wood framing or it could be as simple as a water leak over a long period of time causing the building foundation to sink and become out of level. Poor soil conditions with either too sandy or an expansive clay soil could be the culprit also.

Sloping floors can be damaged from incorrect landscape drainage. This would involve water settling around the foundation of your home and over a period of time the weight of the house along with soil problems can create the building to start sloping to one side.

The number one contributor to a sloping floor again like most damage done to a house is going to be water. Do your best to keep the water away from the house using roof gutters and landscape drains. These items are relatively inexpensive compared to the costs involved in repairing sloping floors.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Find out more about Water Damage.

Plaster And Drywall Cracks

Tuesday, September 8, 2009

Problems Walking on an Old Roof

Here's some things to think about before walking on the roof of a house. If you slip and fall off the roof you could get hurt seriously. For your own safety if you have no experience walking on a roof use extreme caution. I would even suggest using a ladder and moving the latter around the perimeter of the house if you are inspecting the roof for damage.

Here's some things to keep in mind before walking on a house roof.

1. If the building is above two stories hire a contractor especially if you think the roof has building damage.

2. If the roof is too steep stay off. This could be extremely hazardous to your health.

3. If the roof is severely damaged and has loose shingles or tiles, this could create a safety hazard as you slip on one of these loose shingles and possibly fall off the roof.

4. You should stay off the roof at all costs if there is snow or ice. Ice obviously is extremely slippery and would be difficult to walk on. The difficulty would be increased if the roof has a steep slope.

5. Now last but not least if the roof is wet you should avoid walking on it until it is dry. I have been on wet roofs before and personally slipped myself losing my balance but not falling off of the roof.

Climbing up on a roof and walking around is not child's play and should be left to an experienced professional . If you feel comfortable walking around on any roof please use caution. If you slip in the middle of the roof there is a good chance you will be able to regain your balance or have time to stop yourself before falling off.

I would suggest using caution near the edges of the roof. If the roof is too steep or you don't feel comfortable, why risk serious injury. Use common sense along with the proper ladders to ensure your safety and "Think before walking on a house roof."

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Monday, September 7, 2009

Energy Saving Tips For Your Heating and Cooling System

Your HVAC (Heating, Ventilation, Air Conditioning) system works hard to keep you warm in the winter and cool in the summer. As a result you probably experience some pretty high utility bills. There are so many ways that you can make your home more energy efficient and thus lower your utility bills. At the same time you will help to conserve energy which helps our environment.

Programmable Thermostats

Installing a programmable thermostat or knowing how to effectively use the one you already have is one of the best ways to save energy and money. Programmable thermostats are made to have setting by which you can program when you want your heat or air to increase or decrease its temperature. For example, overnight is a common time when homeowners turn their heat down by a degree or two, such as to 68 degrees. If you have warn pajamas and a warm blanket then 68 degrees is a very comfortable temperature. I would suggest lowering it even more and programming your thermostat to increase the temperature just before you wake up in the morning. You can follow the same plan for hours that you are not at home and program the thermostat to increase its temperature just before you come home from work. It's truly amazing how much you can save. In fact, it is estimated that you can save about $180 a year by properly setting your programmable thermostats and maintaining those settings.

Humidifier Settings

Every HVAC system should have a humidifier. It isn't enough to have a humidifier though, it must be set to the proper settings so that it can be energy efficient and work to save you money. For example, if your humidifier is set too high during the summer then your home will feel hotter then it should and thus make your air conditioner work harder, costing you more money and using more energy then really needed. The recommended average setting is 35% and you will have to make slight adjustments according to the changes in the weather. Your humidifier should have recommended settings according to the outside temperature.

Following these tips for decreasing your utility bills and energy outputs will really save you money. Take the time to figure out the proper settings for your home and it will really pay off!

Visit HVAC Networx for more energy saving information, HVAC articles, to find HVAC contractors and to receive free HVAC quotes.

Miriam Tatelbaum is a content writer for Networx.com

At Networx.com, we connect you with local contractors who are trustworthy, quality professionals that are screened by us and reviewed by you. Make sure you click this link HVAC Networx to find a reliable, local HVAC contractor in your area.

Drywall Needs Finishing Touches

Wainscoting has been in high demand for so many years. It s something that many people are looking for in their homes.

Wainscoting is a type of paneling. It is usually used on the lower parts of walls inside homes and offices. It can be formed from wood or plastic. The actual definition of wainscoting is any type of paneling that you put up. Most of the styles are still very in demand today.

You can find wainscoting that is great for decorating your home. you will find different types and looks that will match your home dcor. The materials that you want for this are going to vary and you will want to think about the look that you are trying to achieve.

Wainscoting can be different heights. It is usually going to be found on the bottom of walls and will run around the entire size for any room. some people like to use chair rail or border to accent their chair rail so that it is not so plain looking.

Having the more traditional wainscoting is going to be a little bit higher up. This will usually go from forty eight to fifty four inches. It can protect and decorate the entire area. The taller type of wainscoting came from the mid nineteenth century. The style was tongue and groove and it went vertical on the wall. It is usually nailed on. This is something that was and still is very popular in many homes around the world.

There is an higher level of wainscot and this will be mostly found in dining areas. It is about sixty to seventy two inches. They are going to be kept separate by three inch molding. This is not the choice if you have a lower bay window in the room.

There is a great history behind wainscot. There were good features and bad features with it. it does look good and matches many different home's styles of what the homeowner wants. Some will have great elegance and can be a little on the costly side.

Many people like wainscot because it is durable. Kids can hit the walls and parents do not have to worry because the wainscot is very strong and you will not have marks on the walls. You will also not have to worry about handprints all over your walls. It will clean up easily with a wet cloth. It is easy to install and maintain as well.

This brand of material for your home is one that is very popular and a lot of people love the way it looks in their home. With the way it seems now, wainscot will be around for many more years to come.

Robert Carlton's long articles are published on several online sites associated with adding a bay window. You can discover his writings on bay window installation at various other sources for bay window installation information.

Freshen Up Your Bedroom

Fresh air is good for you, but how much time do you spend outdoors?

Since many of us spend most of our lives indoors, we should be aware of what is called "sick-house" syndrome. This sick house syndrome is a byproduct of keeping your house closed up against outside elements. We all want to block out noise, pollution and cold or hot air but this also prevents toxic fumes from getting out of our house!

Harmful fumes can come from paints, cleaning products, air fresheners and even wood smoke if you have a fireplace. Believe it or not, even your furniture and carper can emit dangerous pollutants. Keeping your house sealed up to keep out the elements can also keep these fumes inside. Studies show that the air in our homes should be changed ten times per day - anything less causes build up of dangerous pollutants.

Since you spend most of your time in the bedroom, heres where you should start to freshen up your air. Youll be healthier and your bedroom will smell better too!

First, open the windows (just a crack is sufficient) when possible, and check to make sure that all vents are unblocked.

Another problem that lack of ventilation can cause is mold and mildew. This is found to be a danger not only to your health, but it can also damage the structure of your house. Especially in rooms such as the master and guest bathrooms, where humidity is likely to be high, proper ventilation is essential. The use of fans in these areas are helpful.

Also, check areas such as the attic, and underneath floors for proper air circulation. If you have a humidity problem upstairs, it probably means that the attic or roof space needs more ventilation. Be aware that some types of flooring can cause structural damage if there is not adequate ventilation beneath it.

Everyone wants a clean smelling bedroom but icky smells happen and you should not overdo it with room air fresheners. Aerosols should especially be avoided as they are not eco friendly and have chemical additives. You wont be able to create a fresh smell in your bedroom by adding more scent to the air instead open a window and let the real fresh air in!

A great way to make a safe air freshener and deodorizer for your bedroom is to sprinkle a few drops of vanilla or scented essential oil on a cotton ball. Put the ball in a pretty dresser tray or other open container that you will not mind if the oil touches it. Other ways to freshen up your bedroom naturally include using baking soda, white vinegar or dried herbs. Try putting a bouquet of fresh flowers on your dressing table for a great smell and a great look!

One other thing to be careful about in the bedroom is perfumes and hair sprays. You should keep the use of these to a minimum and try using only natural products if you can.

If you or your loved ones suffer from unexplained drowsiness, headaches or a general malaise, try getting fresher air through the house. Your family and your home will breath easier and avoid the "sick-house" syndrome.

Lee Dobbins writes for Bedroom Designs and Decorations where you can learn more about designing your dream bedroom.

Building a Green Home - Six Ways to Save Energy (and Money)

There are many areas where you can experience significant energy savings when you are building a green home.By working with an architect in the early design stages, many of these areas can be addressed in the design of your energy efficient home, helping you to save money in the future and enjoy a healthier home:

1)Footprint:Reduce the size of your home.Your home design should be limited to only as much space as your family needs.This will keep your energy usage to a minimum right from the start.

2) Windows:Windows are a break in the thermal insulating barrier of your home.The higher quality window you choose the better performance the entire home will achieve.

3)Insulation:Even if you do nothing else, by choosing a superior building envelope for your home like structural insulated panels (SIPs panels) and/or an insulated concrete form foundation system (ICF), you will enjoy huge savings in heating and cooling your home (up to 50%-60% over a home without SIPs).

4) Passive solar design:By incorporating sunlight for lighting and heat and natural ventilation into the basic home design, you can reduce the size of mechanical systems and lighting in the home.

5) Heating system:Consider a renewable energy system to heat and cool the space and tap water in your home (solar, wind, geothermal).

6) Ventilation:Incorporate an air-to-air exchanger, or heat recovery ventilator (HRV) system into your home. This will replace stale air with fresh outdoor air while maintaining the temperature inside the home and conserving energy.

There are many other areas of the home that can be addressed to increase energy efficiency and save money over the life of your home. In the beginning stages of the home design, your green architect will discuss your opportunities to save money while providing a healthy environment for your family.

About the Author: Jeremy Bonin, a principal partner of Bonin Architects & Associates http://www.boninarchitects.com, is an award-winning green architect and the author of TIMBER FRAMES: Designing Your Custom Home. With a special interest in sustainable design and green homes, structural insulated panels (SIPs), as well as timber frame construction, Jeremy incorporates renewable energy practices where possible, including geo-thermal, solar, radiant heat, and energy-efficient foundation systems.

Why You Should Go For Punched Tin Light Fixtures

Punched tin light fixtures are associated with early American chandeliers and lamps. Today, original punched tin light fixtures are going for a fortune, unless of course you want to settle for an imitation. Making them the old fashioned way, creates a high quality and beautiful product. Choosing between the finer hand crafted product and the mass produced product in the market is only dependent on the individual preference and the specific application that one needs the it for.

The handcrafted punched tin light fixtures are more expensive. They come in many different types such as Spun Wood Chandeliers, Tin Chandeliers, Exterior Lighting, Hanging Lights, Sconces & Lamps, Ceiling Light Fixtures, wall lamps, and lanterns. They blend in perfectly with a rustic home decor. Internet sites are one of the easiest ways to purchase these customized fixtures. You will be provided with high quality lighting fixtures inspired by American colonial traditions. they could be made of solid copper and brass. The lights are available in different finishes, aged finish, a dark gray color, wood finish and painted finishes.

Before buying punched tin light fixtures there are a few details that you need to check and certify; Check to make sure that the wiring is properly put in place, what kind of bulbs they use i.e. do they use fluorescent lights or light emitting diodes? Is it easy to access the bulb during replacement? How practical is the fixture? does it hang too low or too high? There are many small family businesses out there that deal in the production of Punched tin light fixtures as a matter of tradition and you can expect them to give you high quality finishing of these cultural and historic heritage of the American nation.

Peter Gitundu Researches and Reports on Light Fixtures. For More Information on Punched Tin Light Fixtures, Visit His Site at PUNCHED TIN LIGHT FIXTURES

Ideas For Living on a Budget

Do you have to live on a budget because you do not make a lot of money? Maybe you just want to be able to save so you want to know how to live on a budget. There are plenty of things you can do to save some money. Here are 4 ideas for living on a budget.

First, go to the grocery store with a list. It is proven that if you go to the grocery with a list you will be able to save up to 40% on your grocery bill. As long as you stick to the list you will only buy what you need and you will be able to avoid the impulse buys.

You can also clip coupons and buy things that are on special. Many grocery stores have a membership card that is free and you can save a lot of money buying things that are on sale with their card. Sometimes they have 10 for $10 sales and if it is on something that you use a lot of you might as well stock up and save money.

Second, you can save money by using energy saving light bulbs. These bulbs are great for the environment and are proven to help you cut your energy bill. You can save a few dollars each month by using the light bulbs. On top of that you will not have to pay for as many light bulbs because the energy saving bulbs last up to 10 times as long.

The last idea for living on a budget is to get rid of your ATM card and put your money in directly into your bank account. If you have a checking account get rid of your debit card and leave your check book at home.

This will allow you to put money in the bank and have very little access to it. By eliminating the access to your money you will not be as tempted to spend it on things you don't need.

You can use these ideas for living on a budget to help you save money. You should also stop eating out as much and watch how much money you spend on things like beer and wine. Going out eats up a lot of peoples budget and with a little discipline you can live on a budget without any money troubles.

Discover more about Ideas For Living On A Budget by visiting the follow website:

Ideas For Living On A Budget

Great Books for Home Building

If you're a do it yourself or or a homeowner who every once in a while, once to tackle a small or large project but doesn't know where to begin, can gather useful information from home building books. I have been using these books for years and may have been worth their weight in gold.

I started my career working for my father and my father worked for his father as a Carpenter. Our job was to frame the house and we built a Lotta homes. I learned how to frame and developed some great carpentry skills from my father and working with other skilled carpenters. Over the years, if you're paying attention, even a monkey can figure out, how to assemble almost anything.

The only problem that I faced, was learning how to build the rest of the home. I would often ask questions to other building trades like plumbers, electricians, roofers and construction superintendents. Some of these people were helpful and others were not. When I was in my early 30s, I purchased my first book on home building. This book lead to other books and soon I found myself with more home building knowledge that my father.

I had about 50 books on home building and soon found myself doing large home remodels, with no formal education. I would attribute almost everything that I learned outside of house framing to books. These books have proven invaluable to me over the years and with a relatively small investment. I couldn't have spent over $200 purchasing these books but have used the knowledge from them to save myself thousands of dollars.

One $20 home building books or home repairs, can save you lots of money, if you're willing to do a little research and the labor to complete almost any home building project.

By the way, if you're interested in learning how to repair a roof, build your own house, interior decorating, structural engineering, building a deck, gathering some more information about home painting or even remodeling your bathroom. An online home building bookstore can save you money if you're willing to do the work.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If your looking for some more home inspection or home building ideas.

Sunday, September 6, 2009

What to Expect During Sunroom Construction

The exact details of sunroom construction can vary based on the design involved, but there are things homeowners can expect to see fall into place as their dream addition becomes a reality. Although the process is generally not very long, it can create a bit of an upheaval as it is going on.

No matter what type of sunroom is planned for a yard, the basic process will involve these steps:

Design phase - Before a sunroom can be constructed, a design and blueprints will be needed. This will be the case whether a sunroom is built from the ground up by a homeowner or a contractor. The step will also come into play if a kit installation is planned. The kit will be based upon a preselected design.

Permitting - This is often required for the construction of a sunroom or any other home addition that involves structural building. It is smart to check with a local building office before construction begins. A contractor will generally take care of this for a homeowner, but this is not always the case. The blueprints will be required to obtain a permit.

Site preparation - Before a sunroom can go into place, the construction site will have to be prepared. This generally involves removing grass and other growth from the area and also making sure the land is level and ready for construction.

Slab pouring - Unless a sunroom will sit on an existing concrete patio, a floor will need to be created. This will be the first step in actual construction.

Building - The last phase of construction will involve the actual preparation of walls and the roofing system. It may include electrical work, as well.

Inspection - If permits were necessary for construction, a final inspection may also be required before the project will be signed off on.

Sunroom construction does involve a detailed process. This is designed to help ensure the final product meets expectations.

For more information on sunrooms, sunroom additions and related topics, visit DIYSunroomsInfo.com

Gas Burning Wood Stoves - All You Need to Know

A gas burning wood stove is no longer a heavy stove which provides only heat. It has undergone many changes to fit the ambience and dcor of your house. The body of the stove is still made of cast iron and it comes with a vent. Other than that, it is very attractive to look at while being very fuel-efficient.

Such a oven also keeps with the EPA standards and does not pollute the atmosphere. Moreover, it uses natural fuels like propane which emits very less fumes. Even the ones using wood as a fuel use wooden scrap or pellets as fuel. That is, these stoves use those parts of wood which would otherwise be wasted. Hence, they are a very good way of saving money.

The energy prices always tend to rise. However, switching to gas burning wood stoves would definitely save some of the money spent on paying energy bills. These ovens come with vents, which can divert heat into other rooms. Some of these use the vents of the existing fireplace of the house to divert the heat. These stoves are also very easy to install. They come in with an in-built program to shut down on reaching a temperature of above 70 degrees Fahrenheit. This is a safety measure which takes away your worry of manually controlling the temperature. In normal fireplaces, you would need to control the temperature.

However, if you do install a gas burning wood stove, you must get your fire alarm checked regularly. This would just be an extra precaution. It must meet EPA standards. But, other than a few precautions, you are otherwise all set to own trendy new gas stoves. The cast iron body makes the oven very chic to look at. The dancing yellow free flames created by the natural gas add a very warm and cozy feel to your home. So go ahead and get your own gas stove!

Visit CORE online to get free access to more information and resources on gas burning stoves.

Repair Cracks in a Concrete Foundation

Leaking cracks in concrete foundations are a common problem for many homeowners. While the cracks are caused by the natural process of concrete curing and shrinking, the cracks can be an annoyance for the homeowner. That is because many homeowners want their basements to act as an added living space with carpeting, finished walls and furniture.

Concrete Foundation Shrinkage Crack Causes

First, all residential foundations crack. Concrete has water as an ingredient in the mix. As the concrete cures, it goes through a chemical process that causes it to harden into a solid. As it hardens, the concrete actually loses volume; that is it shrinks. In fact a concrete wall 100' long can shrink by as much as ".

The shrinkage process causes stress forces to develop in the concrete and to relieve the pressure, it cracks. This is okay because a concrete foundation has steel reinforcing bars inside that maintain the strength of the foundation wall. It is common to see cracks develop in the middle of a long wall, under a window or where the foundation steps down.

You will notice that the cracks are usually wider at the top of the foundation and get narrower as you go down the wall. Again, this is normal. You should rarely see the reverse and if so, it may be signs of structural problems with the foundation.

Water Penetration into a Foundation Crack

Water can enter a foundation crack from two directions, from the top of the crack or horizontally from the sides. If a foundation crack occurs at the corner of a basement window, it is possible for rainwater to enter the crack from the top where the window sits back from the edge of the foundation. The water will run down the inside the foundation wall and be forced out to the interior surface somewhere below where the crack gets narrower.

Also, improper grading can cause water to enter from the top. Low spots in the yard or sloping towards the house will cause water to enter at the top. A home with improper grading can cause rainwater to pool against the foundation and enter the crack.

Another way for water to enter a crack is horizontally below the ground (called below grade.) As it rains, the rainwater saturates the soil around a foundation and water enters the foundation crack. Again, the water enters the crack and begins running down inside of it until the crack narrows and is forced out to the interior of the basement. The homeowner will then see water seeping down the wall and onto the basement floor.

Repairing the Foundation Crack Leak

There are several ways to stop the water from entering a foundation crack and leaking into the basement. The first and most expensive way is to excavate along the foundation wall and exposing it. A contractor can then apply one of several different waterproofing membranes to the foundation wall.

This is the most expensive repair process since a large machine must be employed to excavate the foundation wall. It is not a feasible solution for most homeowners because of the time and expense of the repair. A typical repair process may take 2-3 days, depending on how much must be excavated. The excavation requires a large area around the home to place the removed soil. And any landscaping around the home must be removed.

Interior repairs are much more common and feasible for a homeowner. They can be done quickly and for little expense. A traditional interior repair entails a contractor chiseling out a vee-notch approximately 6" wide on the interior surface of the foundation wall and 4" deep. This notch narrows as it is made to about 1" in width at the back of the notch. The vee-notch is made the entire height of the foundation wall.

Once the notch is made, the contractor will then fill the crack with hydraulic cement. This cement actually expands a tiny amount and bonds to the existing foundation walls. The disadvantage to a vee-notch repair is that water can still penetrate halfway into the crack; that is the other 4" of foundation wall width.

As the water evaporates out and into the basement, it leaves behind salts that were dissolved in the water. These salts build up along the bond between the hydraulic cement and the foundation wall. Eventually these salts will cause the bond between the cement and wall to fail and allow water to enter again.

Also groundwater exerts a horizontal force called hydrostatic pressure. This pressure can be transferred directly to the cement in the crack and cause it be forced out of the vee-notch.

Crack Injection Foundation Repair

A better solution is to perform a urethane foam injection. For over 15 years urethanes have been used to stop water from leaking into a basement. The repair is performed by a technician inside the basement. The urethane enters the crack as a two part liquid that is mixed by a static mixer as it enters the crack.

The liquid urethane fills the crack completely, from front to back and bottom to top. When the urethane encounters water that is already in the crack or placed there by the technician, it begins to foam. This foaming process greatly increases the volume of the urethane and it fills the crack.

Since the crack is completely filled, no water can enter the foundation crack. So there is no problem of the dissolved salts breaking the bond of the urethane to the concrete foundation. Also the hydrostatic pressure can't force the urethane out because its bonding strength is much higher than hydraulic cement.

A typical repair can be done in one hour per crack.

A Dry Basement

With the foundation crack filled, the basement area will be dry and free of water. The outside landscaping is not disturbed and for little expense the basement becomes a usable area. Now the homeowner can safely install drywall, carpeting and furniture.

This article is written by Aaron Kuertz with Applied Technologies. Aaron has been in the waterproofing industry since 1998. Applied Technologies is a manufacturer and supplier to professional waterproofing contractors and homeowners in the United States. To learn more about concrete foundation crack repair visit Applied Technologies on the web.

Phase Change Materials - Eutectic Thermal Energy Storage Products

Ice Thermal Energy Storage (TES) has the advantage of universal availability, low cost and transport ability through other system components. However, a conventional ice TES system for air conditioning application requires low temperature chillers and therefore standard water chillers must be replaced with low temperature glycol chillers which operate with a lower evaporation temperature and consume more power.

If we can offer designers an ice which freezes and melts above or below 0C (32 F) these new products will open new horizons for environmentally friendly and economical systems for both New and Retrofit type process cooling / heating load shifting applications.

Phase Change Material (PCM) Eutectic solutions are mixtures of two or more chemicals which, when mixed in a particular ratio, have a freezing / melting point below or above water freezing temperature of 0 C (32 F) and they offer a thermal energy storage facility between -114 C (-173 F) and +164 C (327 F).

Eutectics are well-known and in fact early applications date back to the late 18th century however the separation and the life expectancy of these mixtures were unpredictable and therefore their wide spread usage was limited.

The disadvantages of a conventional HVAC chiller and ice (water ice) storage system can be overcome by utilising the latent heat capacity of various "Eutectic" mixtures without the need for minus circulation temperatures.

Phase Change Material (PCM) thermal energy storage not only enables the designer to utilise existing chiller technology but also enables charging by means of free cooling, i.e. without running the chillers

Although the term "Eutectic" is widely used to describe the materials we are interested in, a better description would be "Phase Change Materials" ("PCMs"). Unfortunately, very few of the documented PCM solutions are true Eutectics and so many have to be modified to obtain a material suitable for long term use.

PCMs can be broadly grouped into two categories; "Organic Compounds" and "Salt-based Products". The fundamental requirement for a modified Eutectic (PCM) Solution can be classified in three categories, namely stable solution (no separation or degrading), minimum supercooling / heating and finally close freezing and melting temperatures.


There are three fundamental additives commonly used to modify hydrated salt based Eutectic PCM solutions. These three components are firstly Nucleating Agent which encourages Crystal formation and therefore minimizes super cooling and the secondly additive is Freeze Depressant to achieve a lower phase change temperature and thirdly Gelling / Thickening Agent in order to overcome separation and degrading problems.

Once the above components have been carefully applied, a satisfactory Eutectic PCM Solution can be produced from the physical and thermodynamic point of views and commercially available solutions offer a range of -114 C (-173 F) and +164 C (327 F).

However, majority of suitable PCM solutions for HVAC and refrigeration systems are corrosive to commonly used pipe and line components and therefore suitable encapsulation techniques must be applied to overcome this problem while providing the best thermal performance. Various encapsulation techniques such as tube, flat container or alternatively ball concepts have been developed whereby the PCM solutions are encapsulated in plastic and / or metal shell.

The heat transfer between the surrounding media, which flows around or inside the unit and the surrounding PCM solutions, takes place from the outer or inner or the combination of both surfaces of the encapsulated PCM unit. These techniques are generally eliminates the contamination risk and offers an efficient, cost effective, practical and flexible new type of TES designs.

Modern society's reliance on refrigeration and air conditioning indicates that refrigeration and the associated environmental issues will be with us for a considerable time and therefore one has to utilize existing and available alternative technologies with minimum usage of energy.

A Positive Temperature Eutectic Phase Change Material (PCM) Thermal Energy Storage (TES) not only provides the end user with an Environmentally Friendly design but also the following additional benefits can be obtained:

Reduced Equipment Size
Capital Cost Saving
Energy Cost Saving
Environmentally Friendly Installation
Improved System Operation
Flexibility for the Future Capacities

The temperature ranges offered by the proposed PCM solutions utilize conventional chilled water temperature ranges for both the charging and discharging sides of the system. Hence, they can be applied to any new or retrofit application with minimal technical and economical impacts.

Furthermore, the possibility of Free Cooling Cycle, Absorption Chillers, Co-Generation, Solar, Hot Water and Heat Recovery TES system combinations offer new horizons for designers to control the energy balance to match the load and electricity demand / consumption of the system as a whole.

The task for designers is to explore all available technologies towards achieving improved efficiency regardless of which refrigerant is used, and apply where and when possible diversification technologies in order to minimize the overall CO2 emission related to energy usage. A carefully balanced Eutectic, Phase Change Material (PCM) Thermal Energy Storage (TES) may be the answer for some of the cooling applications for an Environmentally Friendly and Economical alternative.

Zafer Ure, M.Sc., C.Eng., MCIBSE., MASHRAE., MInstR., is the Managing Director of Environmental Process Systems Ltd. and has 25 years experience in the HVAC industry and has written many papers for industry conferences and magazines. Details of PCM Products can be found at http://www.pcmproducts.net and Zafer can be contacted on +44 1733 243400 or at z.ure@epsltd.co.uk